# Boots from SD with one of latest rk3399-sd image


DDR Version 1.24 20191016
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
no stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x10006281, stride = 0x17
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 337
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=61056MB
FwPartOffset=2000 , 0
run on sd0
StorageInit ok = 572706
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             dtbo, start:0xa000, size:0x2000
GPT part:  4, name:         resource, start:0xc000, size:0x8000
GPT part:  5, name:           kernel, start:0x14000, size:0x14000
GPT part:  6, name:             boot, start:0x28000, size:0x18000
GPT part:  7, name:           rootfs, start:0x40000, size:0x340000
GPT part:  8, name:         userdata, start:0x380000, size:0x73bffdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xf6ab8
RunBL31 0x40000 @ 747644 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-256-gebb61ff5 #4 Wed Apr 22 01:34:02 UTC 2020 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g0f5205e029-200623 #root (Aug 18 2022 - 10:59:34 +0800)

Board: FriendlyELEC RK3399 board
PreSerial: 2
DRAM:  992 MiB
Sysmem: init
Relocation Offset: 3dbcd000, fdt: 3bdc13f8
Using default environment

no mmc device at slot 1
Found IDB in SDcard
mmc@fe320000: 1 (SD), sdhci@fe330000: 0
Bootdev(atags): mmc 1
MMC1: Legacy, 50Mhz
PartType: EFI
boot mode: None
Found DTB in resource part
DTB: rk3399-nanopi4-rev04.dtb (76634)
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC:  RK808 
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vcc_sdio init 3000000 uV
I2c2 speed: 100000Hz
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 800000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 24000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz

Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
** Invalid Android Image header **
Android image load failed
Android boot failed, error -1.

## Booting Rockchip Format Image
fdt	 @ 0x08300000 (0x00012de5)
kernel   @ 0x00280000 (0x01d83a00)
ramdisk  @ 0x0a200000 (0x007b2bc0)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   Using Device Tree in place at 0000000008300000, end 0000000008315de4
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x40000000 (size: 0x35e00000)
Total: 3246.414 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.15.78 (fa@jensen) (aarch64-linux-gcc (ctng-1.24.0-345g-FA) 11.1.0, GNU ld (ctng-1.24.0-345g-FA) 2.36.1) #638 SMP PREEMPT Fri Nov 11 22:07:46 CST 2022
[    0.000000] Machine model: FriendlyARM NanoPi NEO4
[    0.000000] efi: UEFI not found.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.000000]   node   0: [mem 0x000000000a200000-0x000000003fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 7680 pages in unavailable ranges
[    0.000000] cma: Reserved 16 MiB at 0x000000003dc00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 28 pages/cpu s75688 r8192 d30808 u114688
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 249864
[    0.000000] Kernel command line: storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normal androidboot.dtbo_idx=1 androidboot.verifiedbootstate=orange swiotlb=1 coherent_pool=1m rw root=/dev/mmcblk1p8 rootfstype=ext4 data=/dev/mmcblk1p9 consoleblank=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Unknown kernel command line parameters "storagemedia=sd data=/dev/mmcblk1p9 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 939432K/1015808K available (14720K kernel code, 2766K rwdata, 4728K rodata, 7872K init, 792K bss, 59992K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 46725 entries in 183 pages
[    0.000000] ftrace: allocated 183 pages with 6 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @2580000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x0000000002600000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000002610000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001045] Console: colour dummy device 80x25
[    0.001782] printk: console [tty0] enabled
[    0.001835] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001869] pid_max: default: 32768 minimum: 301
[    0.001984] LSM: Security Framework initializing
[    0.002112] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.002144] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.005303] rcu: Hierarchical SRCU implementation.
[    0.006161] Platform MSI: interrupt-controller@fee20000 domain created
[    0.006566] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.006765] EFI services will not be available.
[    0.007516] smp: Bringing up secondary CPUs ...
[    0.008446] Detected VIPT I-cache on CPU1
[    0.008485] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.008504] GICv3: CPU1: using allocated LPI pending table @0x0000000002620000
[    0.008562] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.009491] Detected VIPT I-cache on CPU2
[    0.009520] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.009536] GICv3: CPU2: using allocated LPI pending table @0x0000000002630000
[    0.009574] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.010442] Detected VIPT I-cache on CPU3
[    0.010469] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.010485] GICv3: CPU3: using allocated LPI pending table @0x0000000002640000
[    0.010522] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.011391] CPU features: detected: Spectre-v2
[    0.011402] CPU features: detected: Spectre-v4
[    0.011406] CPU features: detected: Spectre-BHB
[    0.011411] CPU features: detected: ARM erratum 1742098
[    0.011415] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.011419] Detected PIPT I-cache on CPU4
[    0.011446] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.011462] GICv3: CPU4: using allocated LPI pending table @0x0000000002650000
[    0.011501] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.012456] Detected PIPT I-cache on CPU5
[    0.012481] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.012495] GICv3: CPU5: using allocated LPI pending table @0x0000000002660000
[    0.012525] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.012656] smp: Brought up 1 node, 6 CPUs
[    0.012966] SMP: Total of 6 processors activated.
[    0.012984] CPU features: detected: 32-bit EL0 Support
[    0.013002] CPU features: detected: CRC32 instructions
[    0.036030] CPU: All CPU(s) started at EL2
[    0.036106] alternatives: patching kernel code
[    0.037534] devtmpfs: initialized
[    0.047834] Registered cp15_barrier emulation handler
[    0.047869] Registered setend emulation handler
[    0.048040] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.048071] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.048823] pinctrl core: initialized pinctrl subsystem
[    0.049333] DMI not present or invalid.
[    0.049917] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.052242] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.052614] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.053169] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.053241] audit: initializing netlink subsys (disabled)
[    0.053419] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[    0.054268] thermal_sys: Registered thermal governor 'fair_share'
[    0.054276] thermal_sys: Registered thermal governor 'step_wise'
[    0.054664] cpuidle: using governor ladder
[    0.054704] cpuidle: using governor menu
[    0.054859] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.055042] ASID allocator initialised with 65536 entries
[    0.077284] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc
[    0.082491] platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop
[    0.082561] platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop
[    0.090765] rockchip-gpio ff720000.gpio0: probed /pinctrl/gpio0@ff720000
[    0.091455] rockchip-gpio ff730000.gpio1: probed /pinctrl/gpio1@ff730000
[    0.092099] rockchip-gpio ff780000.gpio2: probed /pinctrl/gpio2@ff780000
[    0.092715] rockchip-gpio ff788000.gpio3: probed /pinctrl/gpio3@ff788000
[    0.093291] rockchip-gpio ff790000.gpio4: probed /pinctrl/gpio4@ff790000
[    0.107399] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.107423] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.107437] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.107451] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.109524] cryptd: max_cpu_qlen set to 1000
[    0.117161] vcc5v0_core: supplied by vdd_5v
[    0.117601] iommu: Default domain type: Translated 
[    0.117615] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.120201] SCSI subsystem initialized
[    0.120549] usbcore: registered new interface driver usbfs
[    0.120592] usbcore: registered new interface driver hub
[    0.120635] usbcore: registered new device driver usb
[    0.120692] mc: Linux media interface: v0.10
[    0.120720] videodev: Linux video capture interface: v2.00
[    0.120765] pps_core: LinuxPPS API ver. 1 registered
[    0.120776] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.120802] PTP clock support registered
[    0.121431] Advanced Linux Sound Architecture Driver Initialized.
[    0.121943] Bluetooth: Core ver 2.22
[    0.121984] NET: Registered PF_BLUETOOTH protocol family
[    0.121997] Bluetooth: HCI device and connection manager initialized
[    0.122013] Bluetooth: HCI socket layer initialized
[    0.122027] Bluetooth: L2CAP socket layer initialized
[    0.122053] Bluetooth: SCO socket layer initialized
[    0.122077] NetLabel: Initializing
[    0.122086] NetLabel:  domain hash size = 128
[    0.122096] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.122152] NetLabel:  unlabeled traffic allowed by default
[    0.122678] clocksource: Switched to clocksource arch_sys_counter
[    0.170633] VFS: Disk quotas dquot_6.6.0
[    0.170739] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.170878] FS-Cache: Loaded
[    0.179427] NET: Registered PF_INET protocol family
[    0.179616] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.180749] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear)
[    0.180802] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.180825] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.180908] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.181137] TCP: Hash tables configured (established 8192 bind 8192)
[    0.181274] UDP hash table entries: 512 (order: 3, 49152 bytes, linear)
[    0.181341] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear)
[    0.181572] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.182156] RPC: Registered named UNIX socket transport module.
[    0.182174] RPC: Registered udp transport module.
[    0.182184] RPC: Registered tcp transport module.
[    0.182194] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.182210] PCI: CLS 0 bytes, default 64
[    0.182543] Trying to unpack rootfs image as initramfs...
[    0.191499] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.191889] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.580063] Freeing initrd memory: 7880K
[    0.893910] Initialise system trusted keyrings
[    0.894229] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.900414] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.900768] FS-Cache: Netfs 'nfs' registered for caching
[    0.901187] NFS: Registering the id_resolver key type
[    0.901234] Key type id_resolver registered
[    0.901245] Key type id_legacy registered
[    0.901326] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.901345] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.901554] fuse: init (API version 7.34)
[    0.948401] Key type asymmetric registered
[    0.948418] Asymmetric key parser 'x509' registered
[    0.948477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.948645] io scheduler mq-deadline registered
[    0.948660] io scheduler kyber registered
[    0.951348] rockchip-usb2phy ff770000.syscon:usb2phy@e450: failed to create phy
[    0.958428] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.958459] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.959683] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.959704] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.960220] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    0.961753] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 43, base_baud = 1500000) is a 16550A
[    0.962831] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 44, base_baud = 1500000) is a 16550A
[    1.073191] printk: console [ttyS2] enabled
[    1.076067] random: crng init done
[    1.076259] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[    1.077552] rockchip-vop ff900000.vop: Adding to iommu group 3
[    1.084305] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffffc008f461d0)
[    1.085092] [drm] unsupported AFBC format[3231564e]
[    1.087310] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffffc008f461d0)
[    1.091055] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.095566] brd: module loaded
[    1.103211] loop: module loaded
[    1.106487] PPP generic driver version 2.4.2
[    1.107068] usbcore: registered new interface driver asix
[    1.107590] usbcore: registered new interface driver ax88179_178a
[    1.108152] usbcore: registered new interface driver cdc_ether
[    1.108700] usbcore: registered new interface driver qmi_wwan
[    1.117076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.117676] ehci-pci: EHCI PCI platform driver
[    1.118111] ehci-platform: EHCI generic platform driver
[    1.120888] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.121408] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    1.122214] ehci-platform fe3c0000.usb: irq 37, io mem 0xfe3c0000
[    1.138698] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.139465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.140202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.140844] usb usb1: Product: EHCI Host Controller
[    1.141279] usb usb1: Manufacturer: Linux 5.15.78 ehci_hcd
[    1.141767] usb usb1: SerialNumber: fe3c0000.usb
[    1.142641] hub 1-0:1.0: USB hub found
[    1.143024] hub 1-0:1.0: 1 port detected
[    1.143935] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.144496] ohci-platform: OHCI generic platform driver
[    1.145194] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.145798] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    1.146595] ohci-platform fe3e0000.usb: irq 38, io mem 0xfe3e0000
[    1.210853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    1.211591] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.212233] usb usb2: Product: Generic Platform OHCI controller
[    1.212759] usb usb2: Manufacturer: Linux 5.15.78 ohci_hcd
[    1.213246] usb usb2: SerialNumber: fe3e0000.usb
[    1.214086] hub 2-0:1.0: USB hub found
[    1.214452] hub 2-0:1.0: 1 port detected
[    1.215901] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.216408] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[    1.217205] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000202002030010
[    1.218081] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0xfe900000
[    1.218810] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.219304] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    1.219989] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    1.220706] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.221443] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.222084] usb usb3: Product: xHCI Host Controller
[    1.222519] usb usb3: Manufacturer: Linux 5.15.78 xhci-hcd
[    1.223026] usb usb3: SerialNumber: xhci-hcd.0.auto
[    1.223877] hub 3-0:1.0: USB hub found
[    1.224241] hub 3-0:1.0: 1 port detected
[    1.224927] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.225752] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.226488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.227146] usb usb4: Product: xHCI Host Controller
[    1.227582] usb usb4: Manufacturer: Linux 5.15.78 xhci-hcd
[    1.228070] usb usb4: SerialNumber: xhci-hcd.0.auto
[    1.228929] hub 4-0:1.0: USB hub found
[    1.229292] hub 4-0:1.0: 1 port detected
[    1.230013] usbcore: registered new interface driver cdc_acm
[    1.230519] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.231275] usbcore: registered new interface driver cdc_wdm
[    1.231843] usbcore: registered new interface driver usb-storage
[    1.232445] usbcore: registered new interface driver usbserial_generic
[    1.233038] usbserial: USB Serial support registered for generic
[    1.233605] usbcore: registered new interface driver ch341
[    1.234106] usbserial: USB Serial support registered for ch341-uart
[    1.234709] usbcore: registered new interface driver cp210x
[    1.235218] usbserial: USB Serial support registered for cp210x
[    1.235789] usbcore: registered new interface driver ftdi_sio
[    1.236313] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.237054] usbcore: registered new interface driver option
[    1.237563] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.238295] usbcore: registered new interface driver pl2303
[    1.238818] usbserial: USB Serial support registered for pl2303
[    1.239388] usbcore: registered new interface driver qcserial
[    1.239912] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.240891] mousedev: PS/2 mouse device common for all mice
[    1.242163] i2c_dev: i2c /dev entries driver
[    1.248633] IR NEC protocol handler initialized
[    1.249468] rockchip-rga ff680000.rga: HW Version: 0x03.02
[    1.250206] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[    1.253845] dw_wdt ff848000.watchdog: No valid TOPs array specified
[    1.254899] device-mapper: uevent: version 1.0.3
[    1.255565] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    1.258200] sdhci: Secure Digital Host Controller Interface driver
[    1.258777] sdhci: Copyright(c) Pierre Ossman
[    1.259166] Synopsys Designware Multimedia Card Interface Driver
[    1.260155] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.260417] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[    1.261301] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[    1.261895] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[    1.262438] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    1.263342] ledtrig-cpu: registered to indicate activity on CPUs
[    1.264390] hid: raw HID events driver (C) Jiri Kosina
[    1.265266] usbcore: registered new interface driver usbhid
[    1.265769] usbhid: USB HID core driver
[    1.271410] Initializing XFRM netlink socket
[    1.272145] NET: Registered PF_INET6 protocol family
[    1.273726] Segment Routing with IPv6
[    1.274077] In-situ OAM (IOAM) with IPv6
[    1.281091] bpfilter: Loaded bpfilter_umh pid 169
[    1.281862] NET: Registered PF_PACKET protocol family
[    1.282567] Bluetooth: RFCOMM TTY layer initialized
[    1.283032] Bluetooth: RFCOMM socket layer initialized
[    1.283511] Bluetooth: RFCOMM ver 1.11
[    1.283855] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.284385] Bluetooth: HIDP socket layer initialized
[    1.284892] Key type dns_resolver registered
[    1.286598] registered taskstats version 1
[    1.287023] Loading compiled-in X.509 certificates
[    1.287516] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    1.289163] Key type .fscrypt registered
[    1.289523] Key type fscrypt-provisioning registered
[    1.330639] friendlyelec-board board: Serial		: 3293b0852c213abe
[    1.332080] vcc3v3_sys: supplied by vcc5v0_core
[    1.333101] vcc5v0_sys: supplied by vdd_5v
[    1.334154] vcc3v0_sd: supplied by vcc3v3_sys
[    1.335266] vbus_typec: supplied by vdd_5v
[    1.336093] vcc5v0_usb1: supplied by vcc5v0_sys
[    1.345801] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffffc008f461d0)
[    1.348601] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffffc008f461d0)
[    1.349661] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.352124] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffffc008f4a190)
[    1.364445] mmc2: new HS200 MMC card at address 0001
[    1.365848] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB 
[    1.371896]  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    1.374386] mmcblk2boot0: mmc2:0001 AJTD4R 4.00 MiB 
[    1.376576] mmcblk2boot1: mmc2:0001 AJTD4R 4.00 MiB 
[    1.378607] mmcblk2rpmb: mmc2:0001 AJTD4R 4.00 MiB, chardev (243:0)
[    1.523134] Console: switching to colour frame buffer device 240x67
[    1.607213] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    1.609010] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    1.616920] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    1.617614] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5
[    1.618660] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000202002030010
[    1.619813] xhci-hcd xhci-hcd.4.auto: irq 74, io mem 0xfe800000
[    1.621012] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    1.621670] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6
[    1.621729] ehci-platform fe380000.usb: EHCI Host Controller
[    1.622573] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[    1.623252] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 7
[    1.624212] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.625026] ehci-platform fe380000.usb: irq 35, io mem 0xfe380000
[    1.625816] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.627360] usb usb5: Product: xHCI Host Controller
[    1.627931] usb usb5: Manufacturer: Linux 5.15.78 xhci-hcd
[    1.628569] usb usb5: SerialNumber: xhci-hcd.4.auto
[    1.629984] hub 5-0:1.0: USB hub found
[    1.630480] hub 5-0:1.0: 1 port detected
[    1.631489] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.632609] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.633567] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.634403] usb usb6: Product: xHCI Host Controller
[    1.634991] usb usb6: Manufacturer: Linux 5.15.78 xhci-hcd
[    1.635631] usb usb6: SerialNumber: xhci-hcd.4.auto
[    1.637165] hub 6-0:1.0: USB hub found
[    1.637666] hub 6-0:1.0: 1 port detected
[    1.638870] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.639907] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.640868] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.641705] usb usb7: Product: EHCI Host Controller
[    1.642275] usb usb7: Manufacturer: Linux 5.15.78 ehci_hcd
[    1.642933] usb usb7: SerialNumber: fe380000.usb
[    1.644232] hub 7-0:1.0: USB hub found
[    1.644721] hub 7-0:1.0: 1 port detected
[    1.646345] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.647180] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 8
[    1.648257] ohci-platform fe3a0000.usb: irq 36, io mem 0xfe3a0000
[    1.711116] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    1.712240] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.713130] usb usb8: Product: Generic Platform OHCI controller
[    1.713871] usb usb8: Manufacturer: Linux 5.15.78 ohci_hcd
[    1.723225] usb usb8: SerialNumber: fe3a0000.usb
[    1.733155] hub 8-0:1.0: USB hub found
[    1.742248] hub 8-0:1.0: 1 port detected
[    1.752809] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.764403] vdd_cpu_b: supplied by vcc3v3_sys
[    1.773862] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.780869] vdd_gpu: supplied by vcc3v3_sys
[    1.790450] rk808 0-001b: chip id: 0x0
[    1.801749] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.806383] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.812210] vdd_center: supplied by vcc3v3_sys
[    1.817957] vdd_cpu_l: supplied by vcc3v3_sys
[    1.822491] vcc_ddr: supplied by vcc3v3_sys
[    1.827692] vcc_1v8: supplied by vcc3v3_sys
[    1.832788] vcc1v8_cam: supplied by vcc3v3_sys
[    1.838660] vcc3v0_touch: supplied by vcc3v3_sys
[    1.844185] vcc1v8_pmupll: supplied by vcc3v3_sys
[    1.849730] vcc_sdio: supplied by vcc3v3_sys
[    1.855462] vcca3v0_codec: supplied by vcc3v3_sys
[    1.861745] vcc_1v5: supplied by vcc3v3_sys
[    1.867776] vcca1v8_codec: supplied by vcc3v3_sys
[    1.873438] vcc_3v0: supplied by vcc3v3_sys
[    1.878682] vcc3v3_s3: supplied by vcc3v3_sys
[    1.883436] vcc3v3_s0: supplied by vcc3v3_sys
[    1.893026] rk808-rtc rk808-rtc: registered as rtc0
[    1.898131] rk808-rtc rk808-rtc: setting system clock to 2023-03-21T12:40:43 UTC (1679402443)
[    1.909985] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    1.909985] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[    1.910028] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[    1.918743] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[    1.927270] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[    1.935393] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[    1.943456] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
[    1.951461] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    1.960127] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[    1.970496] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[    1.971800] vcc1v8_s3: supplied by vcc_1v8
[    1.972515] vcca0v9_s3: supplied by vcc1v8_s3
[    1.972989] vcca1v8_s3: supplied by vcc1v8_s3
[    1.973257] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[    1.973308] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[    1.973334] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[    1.974003] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[    1.974047] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.992018] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.994549] mmc_host mmc0: card is non-removable.
[    2.046978] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.071419] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    2.218771] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    2.241102] mmc0: new high speed SDIO card at address 0001
[    2.586789] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    2.597914] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    2.616670] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[    2.627517] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[    2.638307] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    2.649187] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.657055] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    2.664721] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    2.672384] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.680447] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.687651] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.699750] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.707618] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    2.714737] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[    2.721633] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    2.726571] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    2.731509] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    2.736197] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    2.741076] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    2.746054] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    2.749667] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    2.753221] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.767584] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 194
[    2.771321] mmc1: new ultra high speed SDR104 SDXC card at address 0001
[    2.776214] mmcblk1: mmc1:0001 EC2QT 59.6 GiB 
[    2.785301]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    2.876020] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.886372] ALSA device list:
[    2.893149]   #0: hdmi-sound
[    2.900014] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[    2.918441] Freeing unused kernel memory: 7872K
[    2.925793] Run /init as init process
Loading, please wait...
Starting version 249.11-0ubuntu3.7
[    3.358224] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    3.374967] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    3.389659] rk_gmac-dwmac fe300000.ethernet: init for RGMII
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    3.676189] EXT4-fs (mmcblk1p8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Begin: Will now check userdata file system ... fsck from util-linux 2.37.2
[/usr/sbin/fsck.ext4 (1) -- /dev/mmcblk1p9] fsck.ext4 -a -C0 /dev/mmcblk1p9 
userdata: recovering journal
userdata: clean, 1373/11852800 files, 2415441/15171579 blocks
done.
[    4.233744] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.269066] EXT4-fs (mmcblk1p9): re-mounted. Opts: (null). Quota mode: none.
[    4.300570] overlayfs: "xino" feature enabled using 32 upper inode bits.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    4.801822] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.826368] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 20.04.1 LTS!

[    4.920708] systemd[1]: Set hostname to <NanoPi-NEO4>.
[    5.366518] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    5.445348] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored
[    5.506808] systemd[1]: Created slice system-modprobe.slice.
[  OK  ] Created slice system-modprobe.slice.
[    5.514109] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    5.532531] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    5.547342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[    5.563249] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[    5.580071] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[    5.595300] systemd[1]: Reached target Local Encrypted Volumes.
[  OK  ] Reached target Local Encrypted Volumes.
[    5.601339] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    5.607296] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    5.623026] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    5.639582] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    5.655268] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[    5.671879] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[    5.678101] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    5.684458] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    5.699867] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    5.708125] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    5.720085] systemd[1]: Mounting Huge Pages File System...
         Mounting Huge Pages File System...
[    5.739348] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    5.748970] systemd[1]: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[    5.767329] systemd[1]: Mounting Kernel Trace File System...
         Mounting Kernel Trace File System...
[    5.789452] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    5.807041] systemd[1]: Starting Set the console keyboard layout...
         Starting Set the console keyboard layout...
[    5.816856] systemd[1]: Starting Create list of static device nodes for the current kernel...
         Starting Create list of st…odes for the current kernel...
[    5.831251] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    5.846881] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    5.857699] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    5.874988] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[    5.882887] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    5.897600] systemd[1]: Mounted Huge Pages File System.
[  OK  ] Mounted Huge Pages File System.
[    5.903214] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    5.919882] systemd[1]: Mounted Kernel Debug File System.
[  OK  ] Mounted Kernel Debug File System.
[    5.939816] systemd[1]: Mounted Kernel Trace File System.
[  OK  ] Mounted Kernel Trace File System.
[    5.962545] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  OK  ] Finished Create list of st… nodes for the current kernel.
[    5.982616] systemd[1]: Finished Load Kernel Modules.
[  OK  ] Finished Load Kernel Modules.
[    5.992954] systemd[1]: Finished Remount Root and Kernel File Systems.
[  OK  ] Finished Remount Root and Kernel File Systems.
[    6.012330] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Finished Set the console keyboard layout.
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
         Starting Flush Journal to Persistent Storage...
         Starting Load/Save Random Seed...
[    6.109651] systemd-journald[300]: Received client request to flush runtime journal.
         Starting Apply Kernel Variables...
         Starting Create System Users...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Finished Create System Users.
[  OK  ] Finished udev Coldplug all Devices.
[  OK  ] Finished Apply Kernel Variables.
         Starting Helper to synchronize boot up for ifupdown...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Flush Journal to Persistent Storage.
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Create Volatile Files and Directories...
         Starting udev Kernel Device Manager...
[  OK  ] Finished Set console font and keymap.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Finished Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Found device /dev/ttyS2.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Paths.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Started Message of the Day.
[  OK  ] Reached target Timers.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting LSB: automatic crash report generation...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Save initial kernel messages after boot.
         Starting Remove Stale Onli…t4 Metadata Check Snapshots...
         Starting Init board...
         Starting HDMI-force-ON...
         Starting Init Onboard LEDs...
         Starting Dispatcher daemon for systemd-networkd...
         Starting System Logging Service...
         Starting Login Service...
         Starting WPA supplicant...
[  OK  ] Started Network Name Resolution.
[  OK  ] Finished Init board.
[  OK  ] Finished HDMI-force-ON.
[  OK  ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[  OK  ] Found device /sys/subsystem/net/devices/eth0.
[  OK  ] Finished Init Onboard LEDs.
[  OK  ] Started System Logging Service.
[  OK  ] Started LSB: automatic crash report generation.
[  OK  ] Started Login Service.
[  OK  ] Started WPA supplicant.
[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Save/Restore Sound Card State...
[  OK  ] Started ifup for eth0.
[  OK  ] Finished Helper to synchronize boot up for ifupdown.
         Starting Raise network interfaces...
[  OK  ] Finished Save/Restore Sound Card State.
[  OK  ] Reached target Sound Card.
[  OK  ] Started Dispatcher daemon for systemd-networkd.
         Stopping Network Name Resolution...
[  OK  ] Stopped Network Name Resolution.
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[  OK  ] Finished Raise network interfaces.
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
         Starting LSB: disk temperature monitoring daemon...
[  OK  ] Started lcd2usb.
         Starting /etc/rc.local...
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
[  OK  ] Started /etc/rc.local.
[  OK  ] Finished Permit User Sessions.
         Starting Set console scheme...
[  OK  ] Finished Set console scheme.
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Finished Update UTMP about System Runlevel Changes.

Ubuntu 20.04.1 LTS NanoPi-NEO4 ttyS2

NanoPi-NEO4 login: 
